Revit.my: 2011

Sabtu, 31 Disember 2011

revit conditional formulas and schedules

0:48
- Create Parameter Required area
[Manage Tab]
Setting panel > Project Parameter

[Project Parameters Dialog]
Add... button

[Parameter Properties Dialog]
Project Parameter
Instance Parameter
Name : Required Area
Discipline: common
Type of Parameter : Area
Group parameter under: Analysis Results
Categories : Room
OK

[Project Parameters Dialog]
OK

1:25
- Add Fields
[Properties Palette]
Fields > Edit...

[Schedule Properties Dialog]
Available Fields: Require Area
Add button

1:28
Calculate Value button

[Calculate Value Dialog]
Name: area difference
Discipline: Common
Type: Area
Formula: area - required area
OK

[Schedule Properties Dialog]
OK

2:00
- Enter required area
[Schedule: Room Schedule - Project Windows]
Number, Name, Area, required area, area different
1,Room,25,25,0
2,Room,25,24,1
3,Room,19,17,2
4,Room,29,21,-2

2:24
- Add Additional Fields
[Properties Palette]
Fields > Edit...

[Schedule Properties Dialog]
Calculate Value button

[Calculate Value Dialog]
Name: over
Discipline: Common
Type: Yes/No
Formula: or(area > required area)
{ and, or, not only in formula field}
OK

[Schedule Properties Dialog]
Calculate Value button

[Calculate Value Dialog]
Name: under
Discipline: Common
Type: Yes/No
Formula: and (area < required area)
OK

[Schedule Properties Dialog]
OK

4:20
-Control Formatting
[Properties Palette]
Formatting > Edit...

[Schedule Properties Dialog]
Formatting Tab
area Difference
Conditional Format... button

[Conditional Formatting Dialog]
Field: area different
Test: Equal to
Value:0 m2
Background color

[Color dialog]
Cyan
OK

[Conditional Formatting Dialog]
OK

4:45
[Schedule Properties Dialog]
Formatting Tab
over
Conditional Format...button

[Conditional Formatting Dialog]
Field:area different
Test:Equal to
Value: Yes
Background color

[Color dialog]
Yellow
OK

[Conditional Formatting Dialog]
OK

5:03
[Schedule Properties Dialog]
Formatting Tab
under
Conditional Format...button

[Conditional Formatting Dialog]
Field:area different
Test:Equal to
Value: Yes
Background color

[Color dialog]
Red
OK

[Conditional Formatting Dialog]
OK

5:48
-Add share parameter

[Manage Tab]
Settings panel > Shared Parameter

[Edit Share Parameter Dialog]
Parameters New... button

[Parameter Properties]
Name: Yes-No
Discipline: Common
Type of Parameter: Yes/No
OK

[Edit Share Parameter Dialog]
OK

6:20
-Add Project Parameter
[Manage Tab]
Setting panel > Project Parameter

[Project Parameters Dialog]
Add... button

[Parameter Properties Dialog]
Shared parameter radio button check
Select... button

[Shared Parameters Dialog]
Parameters yes-no
Add... button
OK

[Parameter Properties Dialog]
Catagories: Rooms
Instance radio button
OK

[Shared Parameters Dialog]
OK

6:45
[Properties Palette]
Fields > Edit...

[Schedule Properties Dialog]
Fields Tab
Yes-No
Add button
OK

7:00
[Home Tab]
Room and Area > Legend
Lagend
{ Place legend to Drawing Area }

[Choose Space Type and Color Scheme dialog]
OK

[Modify:Color Fill Legend contextual tab]
Edit Scheme button

[Edit Color Scheme Dialog]
Title: yes or no result
Color: yes-no
[Color Not Preserved Massage]
Ok
[Edit Color Scheme Dialog]
OK

7:50
- Adjust yes-no field
[Schedule: Room Schedule - Project Windows]
Number, Name, Area,required area, area different, yes-no
1,Room,25,25,No,No,0,Check
2,Room,25,24,Yes,No,1,Uncheck
3,Room,19,17,Yes,No,2,Uncheck
4,Room,29,21,Yes,Yes,-2,Uncheck

Jumaat, 23 Disember 2011

Webinar: Revit Architecture 2012 Furniture

Revit Architecture 2012 - Tutorial 06

Revit Structure Basics, Grids, Columns, Beams and Beam Systems

Revit Structure 2012: Assemblies

How does HOK utilise Revit?

adaptive_railings.mp4

Adaptive Railing by davidlightrevit

Application Menu> New > Family
[New Family - Select Template File Dialog]
Select Metric Generic Model Adaptive.rft
Open

[Project Browser]
Floor Plans Ref. Level

[Modify:Place Reference Plane Tab]
Draw Panel > Plane

[Drawing Area]
Draw 2 Vertical and 2 horizontal plane

[Modify:Place Lines Tab]
Draw Panel > Model > Point

[Drawing Area]
Place point at 4 intersection

[QAT]
Default 3D button

[Drawing Area]
Select the 4 point

[Modify:Reference Point Tab]
Adaptive Component panel > Make Adaptive

[Drawing Area]
Correct Sequence no of the adaptive point
Select the 4 point

[Properties Palette]
Adaptive Component
Orientation : Vertical by PlacementApply

[Modify Tab]
Work Plane Panel > Set

0:55
[Modify:Place Lines Tab]
Work Plane Panel > Set Select plane at point

[Modify:Place Lines Tab]
Draw Panel > Model > Point Place point at adaptive point
Repeat for the other 3 point

[Modify:Reference Points]
Properties Tab > Property button
Select All 4 point

1:12

[Properties Palette]
Dimensions Offset : Click =

[Associate Family Parameter Dialog]
Add parameter... button

[Parameter Properties Dialog]
Family Parameter
Name: h
Instance parameter
OK

[Associate Family Parameter Dialog]
OK

[Modify:Reference Points]
Properties Tab > Family Type button

[Family types dialog]
Parameter > Dimension > h (default) Value: 1100
Apply
OK

1:26
[Modify:Place Lines Tab]
Draw Panel > Model > Line
Draw to connect line at adaptive point as shown

1:54
Select Line as shown
[Properties Palette]
Identity Data >
Is Reference Line Check

[Modify:Place Lines Tab]
Draw Panel > Model > Point
Place point at one of the line as shown

2:01
[Modify:Place Lines Tab]
Select Panel > ModifySelect the point

[Properties Palette]
Graphics > Show Reference: Always

[Modify:Place Lines Tab]
Work Plane Panel > Set
Select plane at point

[Modify:Place Lines Tab]
Draw Panel > Model > Circle
Draw Circle from point at 25mm radius

2:19
Select Lines and circle as shown
[Modify:Reference Lines Tab]
Form Panel > Create Form > Solid Form

Draw another adaptive component
Application Menu> New > Family

Conceptual Design in Revit Architecture

Revit 2010 Loft

Understanding Hosted points in Revit Architecture 2010

How to create a parametric form in Revit Architecture 2010

Ahad, 18 Disember 2011

Revit MEP Pipe Elevations

Curtain Wall Louvers

Revit Platform: Documenting with the Sheet List

Revit Tips - In Place Wall Sweeps PART 1 - CADtech Seminars.com

Revit Architecture 2012 - Creating Assemblies

Easy Revit (2011) - 15.3 - Parametric Array Family

Autodesk Revit Structure: Introducing the Analytical Model and Loads

Revit Architecture 2011 Beginner Tutorial - 9 (Curtain Systems)

Revit Architecture - Creating New Materials

Revit Architecture - Assigning Materials to an Element

Revit Architecture - Interior Renderings

Revit Architecture - Exterior Renderings

Revit 2010 revolve surface patterns Revittut blogspot

Building Information Modeling (BIM)

Stair with Landings

Autodesk Revit Architecture 2010 Demo

Isnin, 14 November 2011

14 03. Autodesk Revit Room Finish Schedule.mov

CADclip - REVIT 2012 Work Plane Viewer

Keynotes.wmv

worksets.wmv

Managing Worksets in a Linked File via Naming

CADclip - REVIT 2012 WORKSETS 01 INTRO

Revit Architecture 2011 Tutorial - Managing and Applying View Templates

Revit Architecture 2011 Tutorial - Creating the First Local File

Revit Architecture 2012 - Worksharing Enhancements

Set Shared Coordinates in Autodesk Revit

Relocate Elevation Base

Share coordinate Create toposurface Inside revit using shared coordinates In elevation 0 feet and 10 feet level The site plan 23,000ft (100 M) above sea level Don't want to read 23 000ft Site plan view > set View range 30000ft (900 M) Change Project Units to Meter Manage Tab > Setting panel > Project Units Change Length to Meter Change Scale 1:500 View Control Bar 1:500 Massing & Site Tab > Model Site Panel > Toposurface > Option Bar Elevation 23000ft (100M)Start putting point 10ft (1M) increament Can also bring drawing file / data point file Stop at 23400 (105M) Go to elevation Zoom to fit Site plan 23000 (100M) ft above 0 Move down 23000 (100M)ft Manage Tab> Project Location Bar > Position > Relocate project 23000ft We are at 23000ft this is reading properly Show true elevation pick any level Element property Edit type Project base = Shared the level stated 2300 ft (100M) Contour label - to label properlyPick those label Properties  Edit Type Elevation Base=SharedSite plan we want those no to be accurate eltionIn Elevation we want to be project elevation.Change it back to projectNot work Not having negative numberTo supersede accurate numberscurrently we move everything extra 100 ftso if we go below 0 there is no negative number 100 ftThat works fine until you go to site plan then you have manually to place contour line minus 10 how to Share and project coordinatesSemasa memberi input level toposurface semak anda berada pada: Elevation base = project <br />