adaptive_railings.mp4

Adaptive Railing by davidlightrevit

Application Menu> New > Family
[New Family - Select Template File Dialog]
Select Metric Generic Model Adaptive.rft
Open

[Project Browser]
Floor Plans Ref. Level

[Modify:Place Reference Plane Tab]
Draw Panel > Plane

[Drawing Area]
Draw 2 Vertical and 2 horizontal plane

[Modify:Place Lines Tab]
Draw Panel > Model > Point

[Drawing Area]
Place point at 4 intersection

[QAT]
Default 3D button

[Drawing Area]
Select the 4 point

[Modify:Reference Point Tab]
Adaptive Component panel > Make Adaptive

[Drawing Area]
Correct Sequence no of the adaptive point
Select the 4 point

[Properties Palette]
Adaptive Component
Orientation : Vertical by PlacementApply

[Modify Tab]
Work Plane Panel > Set

0:55
[Modify:Place Lines Tab]
Work Plane Panel > Set Select plane at point

[Modify:Place Lines Tab]
Draw Panel > Model > Point Place point at adaptive point
Repeat for the other 3 point

[Modify:Reference Points]
Properties Tab > Property button
Select All 4 point

1:12

[Properties Palette]
Dimensions Offset : Click =

[Associate Family Parameter Dialog]
Add parameter... button

[Parameter Properties Dialog]
Family Parameter
Name: h
Instance parameter
OK

[Associate Family Parameter Dialog]
OK

[Modify:Reference Points]
Properties Tab > Family Type button

[Family types dialog]
Parameter > Dimension > h (default) Value: 1100
Apply
OK

1:26
[Modify:Place Lines Tab]
Draw Panel > Model > Line
Draw to connect line at adaptive point as shown

1:54
Select Line as shown
[Properties Palette]
Identity Data >
Is Reference Line Check

[Modify:Place Lines Tab]
Draw Panel > Model > Point
Place point at one of the line as shown

2:01
[Modify:Place Lines Tab]
Select Panel > ModifySelect the point

[Properties Palette]
Graphics > Show Reference: Always

[Modify:Place Lines Tab]
Work Plane Panel > Set
Select plane at point

[Modify:Place Lines Tab]
Draw Panel > Model > Circle
Draw Circle from point at 25mm radius

2:19
Select Lines and circle as shown
[Modify:Reference Lines Tab]
Form Panel > Create Form > Solid Form

Draw another adaptive component
Application Menu> New > Family